describes benefit redundant routing network

Which of the following best describes a benefit of the use of redundant routing on a network?

  • Single Homed
  • Dual Homed
  • Single Multi-homed
  • Dual Multihomed
  • Conclusion

When talking about ISPS, BGP, and connections, sometimes you will hear terminology like “single homed”, “dual homed”,”single multi-homed” or “dual multi-homed”. These are different design topologies where we describe how a customer is connected (using BGP) to one or more ISPs.

Let’s take a look at some examples.




The single homed design means you have a single connection to a single ISP. With this design, you don’t need BGP since there is only one exit path in your network. You might as well just use a static default route that points to the ISP.

The advantage of a single-homed link is that it’s cost effective, the disadvantage is that you don’t have any redundancy. Your link is a single point of failure but so is using a single ISP.

Dual Homed

The dual homed connection adds some redundancy. You are still only connected to a single ISP, but you use two links instead of one. There are some variations for this design. Here’s the first one:

With this design, we use a single router on both ends, but we do have redundant links.

To increase redundancy, we can add a second router:

In the example above, the ISP has a second router. We also could have used a second router at the customer’s side and a single router at the ISP. For even more redundancy, add a second router at both sides:

The example above offers the most redundancy when you are connected to a single ISP. We have two links and two routers on both ends. One disadvantage of this design is that we are still using a single ISP.

Single Multi-homed

Multihomed means we are connected to at least two different ISPs. The most simple design looks like this:

Above you see that we have a single router at the customer, connected to two different ISPs. The single point of failure in this design is that you only have one router at the customer. When it fails, you won’t be able to connect to any ISP. We can improve this by adding a second router:

This is a pretty good design, we only use single links, but we are connected to two different ISPs using different routers.

Dual Multihomed

The dual multihomed designs means we are connected to two different ISPs, and we use redundant links. There are some variations, here’s the first one:

Above you can see that we are connected to two different ISPs, using one router and two links to each ISP. We have redundant ISPs and links, but the router is still a single point of failure. We can improve this by adding a second router:

The design above is better; it has two customer routers. One disadvantage, however, is that once one of your router fails, you will lose the connection to one of the ISPs. Using the same number of routers and links, the following design might be better:

This design has redundant ISPs, routers, and links. Both customer routers are connected to both ISPs. This design does offer the highest redundancy but it’s also an expensive option.

Conclusion

You have now learned what the different (BGP) connection options to an ISP are:

  • Single homed: you are connected to a single ISP using a single link.
  • Dual homed: you are connected to a single ISP using dual links.
  • Single multi-homed: you are connected to two ISPs using single links.
  • Dual multi-homed: you are connected to two ISPs using dual links.

What does it mean when a routing system is redundant?

When data is sent from one part of the network to another, the data is broken into blocks of bits (packets) that contain enough information so that each packet can be rerouted if necessary. A routing system is redundant because there are multiple paths available for packets to travel through the internet.

Which of the following is most likely to be a benefit to users of the application?

Which of the following is most likely to be a benefit to users of the application? Users of the application may see health benefits as a result of the application encouraging them to exercise with each other.

Which of the following best describes the ability of the two computers to communicate with each other across the Internet?

Which of the following best describes the ability of the two computers to communicate with each other across the Internet? The computers can communicate directly because Internet communication uses standard protocols.

Which of the following best describes the basic idea of fault tolerance?

Which of the following best describes the basic idea of fault tolerance? If part of the system fails, the operation continues without interruption.

zusammenhängende Posts

Which term describes software that enters a computer system without the users knowledge or consent and then performs an unwanted and usually harmful action?
Which of the following best describes the trend in Englands total trade with the world shown in the table?
Which of the following legal term describes a situation in which a failure to exercise treatment causes harm to a patient?
Which of the following statements accurately describes north america in the mid-eighteenth century?
Which of the following interpretations best describes the legacies of colonialism in the 20th century illustrated in the above source?
What is the term that describes helping behavior that benefits others group of answer choices?
Which of the following best describes the relationship between money and subjective well-being?
What is the term that describes the maximum amount of force a muscle can apply in a single effort?
Which of the following describes how the cognitive Mediational theory is different quizlet?
Which of the following terms best describes organizations that allow people to communicate and work together even though they may be thousands of miles apart quizlet?

Toplist

Neuester Beitrag

Stichworte