Which term refers to the disturbance on an electrical circuit caused by that circuits reception of electromagnetic radiation?

e

The electric force experienced by a motionless electrically charged test particle at any point in space relative to the source(s) of the field.

The branch of electrical sciences which studies the unintentional generation, propagation and reception of electromagnetic energy with reference to the unwanted effects (electromagnetic interference, or EMI) that such energy may induce.

Disturbance that interrupts, obstructs, or otherwise degrades or limits the effective performance of electronics and electrical equipment.

A physical field produced by electrically charged objects. Also known as EM Field or EMF.

Disturbance that affects an electrical circuit due to either electromagnetic induction or electromagnetic radiation emitted from an external source.

A short burst of electromagnetic energy. Also known as EMP or transient distrubance.

Form of energy emitted and absorbed by charged particles which exhibits wave-like behavior as it travels through space.

A version of a passive two-terminal electronic component called an inductor which is designed specifically for blocking higher-frequency alternating current (AC) in an electrical circuit, while allowing lower frequency or DC current to pass.

Sudden flow of electricity between two electrically charged objects caused by contact, an electrical short, or dielectric breakdown.

The branch of electrical sciences which studies the unintentional generation, propagation and reception of electromagnetic energy with reference to the unwanted effects (electromagnetic interference, or EMI) that such energy may induce.

A physical field produced by electrically charged objects. Also known as EM Field or EMF.

Disturbance that affects an electrical circuit due to either electromagnetic induction or electromagnetic radiation emitted from an external source.

Filter that is placed between an electronic equipment and a line external to it, to attenuate conducted radio frequencies between the line and the equipment.

A receiver with defined IF-Bandwidths (typically 200 Hz, 9 kHz, 120 kHz, 1 MHz) and standardized detector modes (peak, quasipeak, average, rms, CISPR-AV and CISPR-RMS, RMS-Average). It uses a preselection for an improved dynamic range.

A short burst of electromagnetic energy. Also known as EMP or transient distrubance.

The process in which energy is captured from a system's environment and converted into usable electric power.

the process of adjusting the balance between frequency components within an electronic signal

Any electronic assembly under test. Also known as Device Under Test (DUT).

A measure used to quantify the performance of a digital radio transmitter or receiver. The error vector magnitude is equal to the ratio of the power of the error vector to the root mean square (RMS) power of the reference.

Sudden flow of electricity between two electrically charged objects caused by contact, an electrical short, or dielectric breakdown.

A family of computer networking technologies for local area networks (LANs).

Any electronic assembly under test. Also known as Device Under Test (DUT).

A measure used to quantify the performance of a digital radio transmitter or receiver. The error vector magnitude is equal to the ratio of the power of the error vector to the root mean square (RMS) power of the reference.

Extremely Low Frequency usually refers to magnetic fields at 0.5 to 100 Hertz.

f

An enclosure designed to block electromagnetic waves, formed by using conductive material, such as metal, or by a mesh of such material.

An independent agency of the United States government, created by Congressional statute (see 47 U.S.C. § 151 and 47 U.S.C. § 154), and with the majority of its commissioners appointed by the current President. The FCC works towards six goals in the areas of broadband, competition, the(...)

Computational tool for performing an engineering analysis using mesh generation techniques to breakdown complex problems into small elements.

An independent agency of the United States government, created by Congressional statute (see 47 U.S.C. § 151 and 47 U.S.C. § 154), and with the majority of its commissioners appointed by the current President. The FCC works towards six goals in the areas of broadband, competition, the(...)

A technique for finding approximate solutions to boundary value problems for differential equations.

Passive electric component used to suppress high frequency noise in electronic circuits.

Regions of the electromagnetic field around an object, such as a transmitting antenna, or as a result of radiation scattering off an object.

The magnitude of the received electromagnetic field which will excite a receiving antenna and thereby induce a voltage at a specific frequency in order to provide an input signal to a radio receiver. Field strength meters are used for such applications as cellular, broadcasting, wi-fi and a(...)

An algorithm or device for removing part(s) of a signal.

A beryllium copper electrical gasket used to bond metal panel members on doors, sills, or covers.

Computational tool for performing an engineering analysis using mesh generation techniques to breakdown complex problems into small elements.

A technique for finding approximate solutions to boundary value problems for differential equations.

Specifies how much the amplifier's gain can vary over the specified frequency range. Variations in the flatness of the amplifier's gain can cause distortion of signals passing through the amplifier.

Encoding of information in a carrier wave by varying the instantaneous frequency of the wave.

Encoding of information in a carrier wave by varying the instantaneous frequency of the wave.

g

The ratio between the magnitude of output and input signals.

A conductive material made of a 2-D layer of carbon atoms.