TP-Link Extender Reset
Forgot the TP-Link range extender login or the administrative password to access the extender device? Unable to log in to the TP-link extender? Well, if it happens then you probably have to do a TP Link extender reset to the factory default settings. If you don’t know the steps then don’t panic! We are here to help you. Here, in this article, you will get to know the step-by-step instructions for a factory reset TP Link extender. Let’s go ahead.
Overview of TP-Link Range Extender
The TP-Link range extender is an ultimate device that is used to enhance the wireless signals, extend the wireless network connectivity and fix the issues associated with the TP-Link extender device. Basically, it is a small-sized wall socket that is fixed at home or office for providing wireless signals.
Step-by-Step Guidelines for TP-Link Extender Reset
TP Link extender reset is a simple task. You just need to follow some steps properly. TP-link provides some instructions to reset the TP-Link range extender device without any hassle. There are two methods that are used for TP Link extender reset described below:
Method 1: Factory Reset of TP-Link WiFi Range Extender from Software
Go through the below steps for TP-Link WiFi range extender by using the software:
- Step 1: Firstly, plug in the TP-link range extender in the electrical socket. Also, connect your device to the extender by using WiFi.
- Step 2: After that, log in to the TP-Link range extender device by using the IP address that you have configured during the first-time TP-Link extender setup or default IP address 192.168.0.254.
- Step 3: Next, click on the settings and then go to the system tools.
- Step 4: Click on the backup and restore from the left panel of the menu.
- Step 5: Now, you have to choose the factory restore to execute the factory reset of the TP-Link WiFi range extender.
- Step 6: Next, a pop-up message will display on the screen saying, “Are you sure about the factory default settings?” Tap on the yes button to continue further.
- Step 7: Thereafter, your TP-Link range extender will start rebooting with the factory default settings. Create a new name for your WiFi device.
- Step 8: In the next step, you have to check the wireless signals to confirm whether the wireless booster device factory reset has been completed successfully or not.
- Step 9: At last, you need to set up the TP-Link extender device to extend the range of the wireless signals.
Method 2: Hard Reset of TP-Link WiFi Range Extender
The users perform the hard reset when they forgot the login credentials details of the TP-Link WiFi range extender after performing the setup process. It includes the username, password, and IP address of the TP-Link extender. Follow the below steps to execute the hard reset factory reset TP Link extender:
- Step 1: Firstly, plug your TP-Link range extender into the electrical socket.
- Step 2: After that, turn on your TP-link extender device.
- Step 3: In the next step, use the paper clip or needle or any of the sharp objects to press the reset button of the TP-link extender device on its backside.
- Step 4: Next, press the reset button for some time to reboot the range extender.
- Step 5: Now, you have to wait for some time until the rebooting of the extender device is completed. You need to make sure that the wireless signals show the default SSID name.
That’s All! We hope that the above-mentioned details will help you in resolving the problem with your TP-Link range extender by executing the TP Link extender reset.
- Home
- TP-LINK
- RE305
TP-LINK RE305 router setup & security
- To login to TP-LINK RE305 Router, Open your web browser and type the default IP Address 192.168.0.254 in the address bar
- You should now see the router login page with 2 text fields where you can type a username and a password
- The default username for your TP-LINK RE305 router is admin and the default password is admin
- In the login page of the router's web user interface, type-in the username & password, hit "Login" and now you should see the TP-LINK RE305 router control panel
(Remember, you must be at home and connected to home WiFi to do this)
And no need to get your breathing rates high in case you have changed the username / password of TP-LINK RE305 and forgot them, as you can just reset the TP-LINK RE305 router by press-and-hold the reset button with a clip for about 15 seconds.
TP-LINK RE305 Quick links:
| Default username for TP-LINK RE305: | admin | COPY |
| Default password for TP-LINK RE305: | admin | COPY |
2.Change TP-LINK RE305 Default Login and Password
Since, security of a network is vital, the first and foremost task is to change the TP-LINK RE305 router Default Login and Password to something more personal and secure.
TP-LINK RE305 Router Password Tips:
Choose a complex and hard-to-guess password for your TP-LINK which only you can remember
It should be something personal, like &ilostmyvirginity@30, so that you'll never forget it. Ever
Protect it
The amount of protection directly depends on the password complexity, and the effort taken to protect that password on your TP-LINK RE305 router.
Usability first
Give Password for your TP-LINK RE305 router that you can remember (usability first). Of course, you can build a strong hash password with special characters, numbers, Greek, and Latin. But ultimately you'll end up writing it on a sticky and putting it on the router, which defeats the purpose. Here is an example $lasttriptovegas0916
You did good so far. Now consider ⭐ Bookmarking this page. It always helps.
3.Change TP-LINK RE305 Default WiFi name (SSID) and WiFi Password and enable Network Encryption
Another small suggestion (as it has no impact on security), is to change the TP-LINK RE305 Default WiFi name (SSID) as it will make it more obvious for others to know which network they are connecting to.
Look for Network Name (SSID), this is the WiFi name of your TP-LINK RE305 Router. Do not use your name, home address, or other personal information (since this isn’t a Facebook status!) in the SSID name. (No Mr.Paul&Princy) A few funny WiFi name suggestions: I’m cheating on my WiFi!, FBI Surveillance Van #594 (scares away stupid criminals), Lord of the Pings ...
Once you enter the name for your network, you have to enable WPA2-PSK encryption on your TP-LINK RE305 router. That’s the strongest encryption standard available for home networks.
Enter a new WPA Pre-Shared Key / WiFi Password – this is the password that you will use to connect to your home WiFi. Keep it to 16-20 characters (please!) don’t use the same password that you used for TP-LINK RE305 router login!
🤓 Geek out your guests. Print a Free WiFi QR Code Sticker for your fridge now
4.Update router firmware in TP-LINK RE305 and turn on Automatic Updates
Router software often contains critical bugs and security vulnerabilities; Check if your router has known vulnerabilities
Check - TP-LINK RE305
Its important that you turn on Automatic Firmware updates and always keep your TP-LINK RE305 router up-to-date. To turn on Automatic updates, Login to your TP-LINK RE305 router and look for the section which contains Automatic updates and turn it "ON"
And even if the router has auto-update, check every now and then to make sure it is actually working, and the router firmware is up-to-date. If your router manufacturer hasn't released any updates to the firmware in the past 3-5 years, consider upgrading to a "newer" router
5.Security is a continuous process
Just keep in mind to change the passwords often or at least once in every 6 months! on your TP-LINK RE305 You don't want the safety you have worked so hard for to fail just because of ignorance, negligence, or casual laziness! Time for a bulletin on the fridge, folks! We can remind you though? Enter your email below! Nope, we are not spammers!
TP-LINK RE305 Router Reset instructions
How to Reset the TP-LINK RE305 Router To Factory Default
To reset TP-LINK RE305 router,
- Turn on the TP-LINK RE305 router
- Look for the reset button. Few routers have a tiny hole and few others have a reset button.
- Press the Factory reset button with a straightened paperclip pin or something that gets through the tiny hole, and hold it for about 15 seconds! (till you see all the lights flashing)
- The TP-LINK RE305 router will reboot automatically. the unit has been reset and is ready to use. You can start from Step 1 in this guide to set it up.
TP-LINK RE305 Password Does not Work
Passwords find a way to not work! Or, in most cases, users find a way to forget them! In either case, look up the How to Reset the TP-LINK RE305 Router To Default Settings section
Forgot Password for TP-LINK RE305 Router
Incase if you have changed the default username and password of TP-LINK RE305 and forgot it, please see How to Reset the TP-LINK RE305 Router To Default Settings section
How to boost TP-LINK RE305 WiFi and overcome connectivity issues
1.Place the TP-LINK RE305 in a perfect spot
The perfect spot does it all; be it romance or your router! To avail the best signal and network connectivity, make sure you keep your TP-LINK RE305 router visible and not facing the wall or behind the curtains
2.Find a Good Wireless Channel Instead of Auto on your TP-LINK RE305 router
Auto-channels might fail you once in a while; believe that you’re smarter than the TP-LINK router! Find a seamless wireless channel instead of what the router finds automatically. This would ensure that your signal doesn't interfere with that of your neighbors.
If you’re running a Windows-based PC, you can see what channels neighboring Wi-Fi networks are using.
- Press Start > type “cmd”. Open Command prompt
- In command prompt type netsh wlan show all
You will see a list of all wireless networks and the channels being used in your vicinity. instead of using “Auto” for the control channel, Pick the channel that has the lowest interference
3.Check the frequency of TP-LINK RE305
Check if TP-LINK RE305 has dual-band, the most commonly used band would be 2.4GHz; however, switching to 5GHz would bring out better results! It depends on your device though; if you’re running an old lad, you might have to switch back to the conventional
4.Hardwire gaming consoles / media streamers into your TP-LINK RE305 instead of WiFi
Gaming consoles/media streamers work better when connected through Ethernet cable of TP-LINK RE305; in fact, as you might not be moving your TV all over the house, why connect it to the Wi-Fi at all? The Gaming consoles / video streaming devices flood the network with data. This means that if possible, you should consider hardwire (using Ethernet cable) the devices that tend to consume a lot of bandwidth. Although this can sort of defeat the purpose of having wireless networks, it can actually help your overall network speed of TP-LINK RE305 if you can hardwire the bandwidth hogs.
5. Reboot TP-LINK RE305 on schedule
Here's something important to note! On schedule, folks, reboot your TP-LINK RE305 router! Though routers are built to constantly be running at all times, simple tweaks like regular power cycling (a fancy way of saying, unplugging the power cord and shoving it back up) helps with most issues. Rebooting your TP-LINK RE305 can fix Internet connection problems, improve slow moving connections, and resolve wireless issues altogether. Try unplugging your TP-LINK modem on a quarterly basis to stay proactive (Never reset; always reboot router)