Power is the ability to produce large amounts of force quickly. Are there any athletes that would not want to improve their ability to generate power? Or who want to increase their explosive strength?
What about clients seeking to improve general fitness? Power is essential for all three groups. By incorporating plyometric exercises into training programs, you can harness the speed and force of movement for improved performance and daily activities.
This content aligns with chapter 8 of the NASM Sports Performance Course.
Table of Contents
- What is Plyometrics
- 3 Patterns of Plyo
- OPT Model and Plyometrics
- Benefits
- Programs
- Good Techniques
- Basketball Use Case
What is Plyometrics?
Plyometric training is a quick, powerful movement involving a system of reactive exercises and an eccentric contraction, followed immediately by an explosive concentric contraction. (1, 2) You accomplish this through any movement utilizing the Stretch-Shortening Cycle (SSC). (6, 7)
Plyometric training is often interchangeable with power training. However, as some traditionally use plyometric training to define a specific movement pattern in which three distinct phases of movement occur rapidly, not all power training is plyometric training (though all plyometric training is considered power training). Further, the movement patterns categorized in the NASM OPT Model's Phase 1 would better be classified as power patterns and not plyometric since they all involve a long pause (isometric) between the eccentric and concentric phases.
By contrast, Power Lifting is a sport and often confused with power/explosive training. To clarify, it is a misnomer as its primary focus is strength enhancement and development and traditionally does the bulk of training with heavy, slow lifts. Plyometrics is built upon various scientific principles (stretch-shortening cycle, optimizing sarcomere length, and stretch reflexes) that can help individuals tremendously boost their power output (2, 3).
Improvement to the Rate of Force Development and the maximum power output of various movement patterns related to sport is crucial to improving sport-related tasks. Still, it is also extremely valuable in return to play, post-rehabilitation, and pre-habilitation (or injury reduction) protocols. Note the following areas of injury reduction (3):
● Improved control for varus and valgus movements at the knees during landing
● Enhanced dynamic knee stability during the deceleration phase of landing
● Enhanced anaerobic power and
vertical jump height
● Improvement in overall power and change of direction speed in all planes of motion (saggital, frontal, and transverse)
Plyometric training can add a fun and challenging component to training programs. However, like most training protocols, it must be introduced, coached, and progressed systematically to avoid injuries.
Unilateral and gravity accelerated patterns such as bounding, hops, depth jumps, and combination jumps demand a solid foundation of stability, motor control, coordinated patterning, eccentric strength, joint integrity, flexibility, and technical proficiency to avoid injury.
THE 3 COMPONENTS OF PLYOMETRIC PATTERNS: The Stretch-Shortening Cycle
Plyometric exercises have three distinct components: an eccentric, an amortization, and a concentric phase that releases the explosive force. These three components make up a stretch-shortening cycle.
ECCENTRIC COMPONENT
During the eccentric component, the muscle is pre-stretched, storing potential energy in its elastic elements (2-7). The eccentric phase can be referred to as deceleration, absorption, loading, yielding, or the cocking phase (2-8).
When basketball players bend their knees and lower their arms before a rebound shot or when a baseball player pulls his arm back before a throw to first base are both examples of the eccentric component.
AMORTIZATION COMPONENT
The amortization component is a time of dynamic stabilization during which the muscle transitions from overcoming the acceleration of gravity and loading the energy to releasing it. If this segment lasts too long, the potential elastic energy can be lost.
(Note: the value of the Non Countermovement or "Pause Jump" is seen here
as the emphasis of the movement pattern can be placed upon pure RFD components and minimize the joint impact as well as elastic components). The shorter the amortization segment, the more powerful the results.
CONCENTRIC COMPONENT
Unloading the elastic energy occurs next in the concentric phase, which adds to the tension generated in a concentric muscle contraction. This is where the athlete releases the stored and redirected energy, jumping for the basket or slinging the ball to first base.
USING THE OPT MODEL FOR PLYOMETRICS
Though the old adage of a client containing the prerequisite strength of squatting 1.5x bodyweight before the performance of plyometric patterns is overly simplistic and likely not applicable to all plyometrics patterns (i.e., upper body plyometrics), there are some relatively simple concepts we can use to ensure the success of our clients before adding these patterns to our programming for athletes and fitness enthusiasts.
Before incorporating plyometric exercises, athletes and clients alike must have the ability to balance efficiently and possess adequate core strength, joint stability, and range of motion. Plyometric drills may not be suitable for those with chronic or limiting conditions (2, 3).
Following the NASM Optimum Performance Training ™ (OPT™) model, plyometric exercises progress from Stabilization to Strength, then to Power (2, 3).
Plyometric exercises aren't limited to the lower body. There are upper-body activities, including plyometric push-ups, wall throws, overhead throws or combination moves such as a jump squat with a chest pass.
THE BENEFITS OF PLYOMETRICS
Of the many benefits of plyometric training, some of the more recognized are:
● increased vertical jump height
● increased long jump distance
● Increased
strength
● improved running speed, agility, and quickness
● injury reduction
● improved throwing, hitting, striking velocity
Why does the use of plyometrics and power patterns improve power output and performance? Several reasons have been found as to the realized benefits of utilizing plyometrics (1, 3, 6, 7):
● Rapid eccentric movement followed by immediate concentric contraction enhances power output 10-15%
● Increased explosive strength due to improved rate of force
development RFD
● Increased reactive strength due to greater storage and re-utilization of elastic energy
● Improved ability to transfer force through the joints and minimize energy leaks
● Increased active state/force preload (pre-tension developed in anticipation of power output)
● Enhanced Stretch Reflex (Muscle Spindle/greater contraction
● Decreased co-contraction of the antagonist
● Storage and re-utilization of elastic energy (series elastic component: tendon and
aponeurosis)
● Desensitization of the GTO
● Enhanced neuromuscular efficiency
It's probably easier to see how plyometric training can improve athletic performance, but perhaps more challenging to see why plyometric exercises would benefit the non-athlete.
Plyometrics is interchangeably termed reactive training. From this perspective, it is essentially about how the body interacts with ground surfaces. Quickly responding to an unexpected change in the surface when stepping off a curb or rapidly changing direction when walking a dog on a leash are possible examples clients may encounter (2, 10).
Begin with activities that focus on plyometric stabilization exercises, even using regressions such as step-up/step-down or step-up/step-down to the front on a low box or bench.
You can later progress to jumping jacks, lunge jumps, or tuck jumps.
REMINDER ABOUT THE 3 COMPONENTS
Recall that plyometric exercises are based on three components, an eccentric component that stretches the muscle, the amortization component focusing on dynamic stabilization, and the concentric component that concentrically contracts the muscle.
Many exercises are secretly plyometric exercises if they incorporate explosive moves. Progress plyometric exercises safely by going from easy to challenging, simple to complex, known to unknown, stable to unstable, bodyweight to loaded, or activity-specific (2, 3).
PLYOMETRIC PROGRAMS 101
Plyometric programs are generally developed and progressed consistent with movement complexity, skill-level or mastery, the plane of movement, exercise progression choice, but most importantly, volume and intensity.
The number of foot contacts determines volume (e.g., each time you land or catch = 1 contact) or upper-extremity contacts completed (e.g., each time you catch a ball = 1 contact) (See Table 1-1).
The plyometric activity's intensity is primarily related to variables such as the amount of acceleration due to gravity placed on the body, the amount of impact, whether the pattern is bilateral or unilateral, and what complexity is built into the pattern.
Important to note that while early texts were proponents of higher volume (80-200 contacts seen in table 1-1) (4, 5), more current texts tend to favor reduced volume (25-50 contacts)(1, 3, 6, 7) and place greater emphasis on intensity of patterns as well as the specificity to the sport of the patterns to reflect gameplay.
Historically, much of the research done strictly on plyometric training and outcomes has been done to exclude other training modes (i.e., strength training). Thus much of the recommendations based on research have often been higher in volume as it has not factored in other mixed modes of training. (6)
An integrated strength and conditioning program should encompass, there is simply not enough time to perform high volumes of plyometric and power work if everything is to be addressed in a 60 - 90 minute session with 2-4 sessions per week. Further, it can be argued that to maximize neural and elastic components of power/plyometric training. Volumes should be kept lower to optimize rest and intensity efforts as it is for loaded power and strength efforts (i.e., Olympic Lifting and Barbell Squatting) (1, 3, 6, 7, 8)
OPT: Phase 1 - 5 (from top to bottom)
Adapted from Guide to Real Jump Training (8)
Percent of RM | Reps/Set | Total Reps | Optimal Reps |
<70%: Zone 1 | 3 - 6 | 18 - 30 | 18 |
70-79%: Zone 2 | 3 - 6 | 12 - 24 | 18 |
80-89%: Zone 3 | 2 - 4 | 10 - 20 | 15 |
>90%: Zone 4 | 1 - 2 | 4 - 10 | 7 |
Regardless, training good form with inexperienced individuals or allowing adequate dynamic warm-up with more experienced individuals to reinforce good mechanics are critical to success and avoiding injury.
When designing plyometric programs, as long as the volumes and intensities align with the OPT recommendations, planning can allow for jump and power training 2-4 days per week to maximize learning, progress, and address all planes vectors necessary for integrated performance enhancement.
Use lower-intensity drills (e.g., jumps-in-place, single linear jumps like one plyo box jump) and moderate intensity-drills (multi-directional jumps or multiple linear jumps like a continuous set of plyo box jumps for 10 seconds) as part of your warm-up or as exercises more frequently throughout the week.[1]
HOW TO TEACH GOOD PLYOMETRICS TECHNIQUE
Teaching good technique begins with instructing landing/absorbing/catching mechanics and progressing the program only when form mastery is exhibited.
Some simple mantras to remember are that you must "Load before you can explode" and "train slow, move slow, train fast, move fast, but if you can't do it slowly, you can't do it fast." Some coaching tips to improve jump-landing mechanics include:
PHASE 1
Body position and mechanics, as well as landing/absorption, is key in this phase. (1, 3, 8)
● Instructing individuals how to properly hip-hinge and land is critical. From a standing position, using a dowel or light bar and maintaining good spinal orientation as the body hinges and lowers (i.e., 3 points of contact with the bar – sacrum, thoracic spine, and back of the head) can be helpful. This movement, versus a more quad-dominant lowering position, reduces knee and hip shearing forces while also loading (eccentrically) the gluteus maximus to facilitate more powerful unloading (concentric contraction) during the triple extension phase (ankle, knee, and hip).
● Further, athletes must be instructed about ground contact and absorption. Keeping it simple, since the priority is force absorption to reduce impact and joint wear and tear, the cues keep it quiet and keep it soft. The less noise/sound on impact, the better. A standard error is the "heel slap."
This is the inability (or lack of awareness/effort) to keep the heel of the foot from striking/impacting the ground hard and causing a loud noise on the landing. This increases impact forces. If this cannot be controlled, the pattern's intensity should be reduced until the athlete can master the ability to quietly land on the fall of the foot and maintain a credit card space underneath the heel.
● Arm swing must be taught and not overlooked. It is key to potentiating power and is often misunderstood by athletes. Arms need to be loaded back in hyperextension early and released into flexion with maximal effort.
● LPHC-knee-toe alignment is vital. Getting athletes to keep these priority segments aligned in the sagittal plane (allowing for hip- shoulder-width foot placement based on jumps) has been shown to decrease injury and improve force production due to less lost energy or force leaks.
● Emphasize upper extremity alignment and head position (eyes-ups, head aligned with the spine) using cues like nose-over-toes or chest-over-knees at the bottom of the eccentric loading phase.
● Keep the patterns primarily uniplanar and directional in this phase.
PHASE 2-3
Introduce more dynamic movements, which will begin to vary planes and directions and increase gravity acceleration and impact forces. (1, 2, 3, 6, 7, 8)
● Introduce two planes or direction of movement into patterns
● The introduction of barriers to jump over and variable planes and increased movement speeds due to gravity and countermovement patterning will challenge the athlete to gain another level of motor control and absorption and the ability to change direction and release the stored energy to a greater degree.
● When ready, begin coaching your athletes to reduce the amortization phase or transition between the lowering and rising phases to harness elastic energy into motion (minimizing potential energy leaks).
● Maintain all postural
and landing considerations from previous phases.
PHASE 4 - 5
Progress to double contact movements/bounces (small jump preceding large jump) to potentiate the SSC further. This is what most consider "true plyometrics," wherein the emphasis is on switching from a landing (eccentric) to a take-off (concentric) as rapidly as possible. (1, 2, 3, 6, 7, 8)
● Introduction of bounce or double contact.
● Emphasize minimizing ground contact time.
● Maintain all postural and landing considerations from previous phases.
● Introduce alternating limb patterns.
● Introduce 2+ planes and/or directions of movement.
● Introduce external load.
PHASE 6
The focus of this phase is to move the full spectrum of velocities, planes, directions, and sport-related patterns to fully integrate the weight room to the playing field (1, 2, 3, 6, 7, 8)
● Introduce multiple loading variable and skills into sequences (i.e., MB throws to barrier jumps to sprints.)
● Introduce repeating patterns with maximal elasticity demands (depth jumps, high hurdle jumps, etc.)
● Introduce reactive/chaotic scenarios.
● Hybrid variations of takeoffs and landings (1 - 2 leg and 2 - 1 leg.)
In closing, while plyometrics can be fun, take the needed time to prepare the body physiologically. Develop your systematic plan to advance individuals towards higher-intensity drills once they demonstrate technique mastery and adequately tolerate jump-landing forces.
EXAMPLE PROGRAMS:
Basketball: Phase 1 Stability Endurance
4 days/week Program:
● Focus:
○ Landing
○ NCM Movement
○ Minimal Gravity acceleration
○ Single plane/direction patterns
Movement Category | Day 1: Linear Vertical | Day 2 Lateral Vertical | Day 3 Linear Horizontal | Day 4 Lateral Rotational |
1a. Lower Body Bilateral | NCM Box Jump Up & Stick 3x5 | NCM Lateral Box Jump Up & Stick 3x3e | NCM Band Resisted Broad Jump & Stick 3x5 | NCM Band Resisted Lateral Broad Jump & Stick 3x3e |
1b. Lower Body Unilateral | NCM 1 Leg Box Jump Up & Stick 3x3e | NCM Lateral 1 Leg Box Jump Up & Stick In/Out 3x3e | NCM 1 Leg Bound & Stick 3x3e | NCM 1 Leg Lateral Bound & Stick 3x3e |
1c. Upper Body Bilateral | NCM MB Overhead Throw Kneeling 2 Arm 3x5 | NCM MB Rotational Throw Kneeling 2 Arm 3x3e | NCM MB Chest Pass 2 Arm 3x5 | NCM MB Chest Throw Kneeling 1 Arm 3x3e |
Basketball: Phase 2 Strength Endurance
● Focus:
○ Transition from landing to take off
○ CM Movement
○ Increased gravity acceleration
○ Multiple plane/direction patterns
Movement Category | Day 1: Linear Vertical | Day 2 Lateral Vertical | Day 3 Linear Horizontal | Day 4 Rotational Horizontal |
1a. Lower Body Bilateral | CM Hurdle Jump to Box Jump Up & Down Stick 3x5 | CM Lateral Hurdle Jump to Box Jump Up & Down Stick 3x3e | CM Hurdle Jump to Broad Jump & Stick 3x5 | CM Rotational Hurdle Jump to Broad Jump & Stick 3x3e |
1b. Lower Body Unilateral | CM 1 Leg Box Jump Up & Down Stick 3x3e | CM Lateral 1 Leg Box Jump Up & Down Stick In/Out 3x3e | CM Bound Bound & Stick 3x3e | CM Rotational Bound Bound & Stick 3x3e |
1c. Upper Body Bilateral | CM MB Overhead Throw 1/2Kn 2 Arm 3x5 | CM MB Rotational Throw 1/2Kn 2 Arm 3x3e | CM MB Chest Pass 2 Arm 1/2Kn 3x5 | CM MB Chest Throw Kneeling 1 Arm ½ Kn 3x3e |
Basketball: Phase 3 Muscular Development
Movement Category | Day 1: Linear | Day 2 Lateral | Day 3 Linear | Day 4 Rotational |
1a. Lower Body Bilateral | CM Hurdle Jump 1L - 2L to Box Jump Up & Down Stick 3x5 | CM Lateral Hurdle Jump 1L - 2L to Box Jump Up & Down Stick 3x3e | CM Hurdle Jump 1L - 2L to Broad Jump & Stick 3x5 | CM Rotational Hurdle Jump 1L - 2L to Broad Jump & Stick 3x3e |
1b. Lower Body Unilateral | CM Split Jump Repeat 3x3e | CM Lateral 1 Leg Hurdle Jump In/Out 3x3e | CM Lateral Bound Repeat 3x3e | CM Rotational Bound Bound Repeat 3x3e |
1c. Upper Body Bilateral | CM MB Overhead Throw Rotational 2 Arm 3x5 | CM MB Rotational Throw 2 @90˚ Arm 3x3e | CM MB Chest Pass 2 Arm to Ecc Push Up 3x5 | CM MB Chest Throw Kneeling 1 Arm @90˚ 3x3e |
Basketball: Phase 4 Max Strength
Movement Category | Day 1: Linear | Day 2 Lateral | Day 3 Linear | Day 4 Rotational |
1a. Lower Body Bilateral | DC Box Jump Up Continuous 3x5/4/3 | Lateral DC Box Jump Up Continuous 3x5/4/3 | DC Broad Jump Continuous 3x5/4/3 | DC Lateral Broad Jump Continuous 3e |
1b. Lower Body Unilateral | DC Split Jump Alternate 3x3e | DC Lateral 1 Leg Hurdle Jump to Box Jump In/Out 3x3e | DC Box Split Lateral Jump 3x3e | DC Rotational Bound Bound to Hurdle Jump 3x3e |
1c. Upper Body Bilateral | MB Overhead Throw Rotational 2 Arm Repeat 3x5 | CM MB Rotational Throw @90˚ 2 Arm Repeat 3x3e | CM MB Chest Pass 2 Arm to Ecc Push Up 3x5 | CM MB Chest Throw Kneeling 1 Arm @90˚ Repeat 3x3e |
Basketball: Phase 5 Power
Movement Category | Day 1: Linear | Day 2 Lateral | Day 3 Linear | Day 4 Rotational |
1a. Lower Body Bilateral | Depth Box Jump Up Continuous (1L - 2L Alt) 3x4/3/2 | Lateral Depth Box Jump Up Continuous (1L - 2L Alt) 3x3/3/2e | Depth Drop Box Jump 2L -2L to Bound Alternating Continuous 3x3/3/3 | Lateral - Drop Step Bound to Box Jump to Depth Drop 1L 2e |
1b. Combination | Hurdle Jump 1L Continuous x3 +1 MB Slam 3x1e | Lateral Bound to Rotational Throw 2 @90˚ Arm 3x2e | Depth Drop 2L - 1L to Sprint and MB Chest Pass 3x1e | Rotational Bound to Rotational Chest Pass 3x2e |
SOURCES
Boyle, M. New Functional Training for Sports, 2nd ed. Champaign, IL. Human Kinetics; 2016.
Clark, MA, et al. NASM Essentials of Personal Fitness Training 6th ed. Burlington, MA. Jones & Bartlett Learning; 2018.
McGill, EA, Montel, I. NASM Essentials of Sports Performance Training, 2nd Edition. Burlington, MA. Jones & Bartlett Learning; 2019.
Chu, DA. Jumping Into Plyometrics 2nd ed. Champaign, IL: Human Kinetics; 1998.
Chu, D and Myers, GD. Plyometrics: Dynamic Strength and Explosive Power. Champaign, IL. Human Kinetics (2013).
EXOS Phase 1 Performance Mentorship manual.
EXOS Phase 3 Performance Mentorship manual. San Diego. July 27-30, 2015
Feit, A. Developing the Total Athlete Video Series: Guide to Real World Jumping [Video file]. Retrieved from //athletesacceleration.com/dta-power/
Fleck, SJ, Kraemer, WJ. Designing Resistance Training Programs 2nd ed. Champaign, IL: Human Kinetics; 1997.
Rose, DJ. Fall Proof! A Comprehensive Balance and Mobility Training Program. Champaign, IL: Human Kinetics; 2003.
Yessis, M. Explosive Running: Using the Science of Kinesiology to Improve Your Performance (1st Edition). Columbus, OH. McGraw-Hill Companies. (2000).